Garage Cabinets, Garage Floor Coatings and Closet Systems

Jack's Design Center Overview
Jack's Design Center is an interactive Slide-Lok Storage System design tool, which will enable you to design your own Slide-Lok Storage System online.

Jack's Design Center simplifies the process of designing
your own Slide-Lok Storage Solution with features such as
Drag-and-Drop cabinet design, user dimensions, parts list generator and the ability to print your Slide-Lok creation, making ordering your next Slide-Lok Storage System easier than ever.

Setup Screen
To begin building your own
Slide-Lok Storage System, you
have two options. You can choose
to start with one of Slide-Lok's
pre-configured designs or build
your own Slide-Lok Storage Solution by entering the dimensions of the
space you wish to fill with your
Slide-Lok cabinets.

If you choose to enter your own dimensions, enter them in Feet and Inches and then click the
"Continue" button.

Design Screen
The Design Screen allows you to add, remove and re-position cabinets in your design.The screen shot below gives a brief overview of the tools and features of Jack's Design Center

Adding Cabinets
To add a cabinet to your design, click any of the cabinet icons, then click on the "Working Area " to add that cabinet to your design. The cabinet will then "snap" into place - it's that easy!

Adding Cabinet Options
To add options such as Shelves, Cabinet Backs, and Drawers to your cabinets, click on the icon that represents the option you would like to add in the "Cabinet Options" area, then click on the cabinet(s) you would like to add the options to.

Removing Cabinets and Cabinet Options
To remove a cabinet from your design, click the "Delete Tool" on the tool bar. This will activate the delete function. Then, simply click each cabinet you wish to remove. Once you are done removing cabinets, click the "Selection Tool" to deactivate the Delete function.

Design Screen
Design your own Storage Solutions or
modify one of the pre-configured designs

Tool Bar Overview

Selection Tool
Allows you to re-position cabinets you have placed in your design.

View Controls
Zoom-in, Zoom-out, and Fit-to-Screen
The "View Controls" located on the tool bar give you control over the view of your design. There is a Zoom-in, Zoom-out and a Fit-to-Screen button. The Fit-to-Screen button will re-center and re-size your view to fit the screen.

Delete Cabinet/options Tool
Allows you to remove cabinets and/or cabinet options you have placed in your design.

Show Assembly Tool
Allows you to view interactive 3D
Quick-start assembly animations. To activate, click the "Show Assembly" icon, then click any cabinet you have placed in your design.

Completing Your Design
Once you are satisfied with your design, you can click the "Finish" button to proceed to the "Print Screen".

The "Print Screen" will display a parts list of all the cabinets used in your design and allow you to print the list along with an image of your Storage Solution Design. This should be presented to your local Authorized Slide-Lok Dealer for ordering.